UP600+ Dual Channels LiPo/LiHV Charger For UAV Drone
Max. Power:2X600WMax. Current: 25.0A
LCD Display |LiPo/LiHV| Balance Charge | Storage Charge | 2-6S Battery

Clearly show the battery data of charging/discharging
3.2 inch high definition LCD display

Switch the interface intelligently in every 5 seconds
real-time voltage | charging current | battery capacity | working time
battery type | battery capacity percentage | battery cell voltage
One-key charging, easy for user
Five charging current choice: 5A/10A/15A/20A/25A
Two working mode choice:Charge/Storage charging

Maintain the battery to extend the battery life
Under Storage mode, the battery can be charged/discharged the cell voltage to 3.80V, when the battery
voltage is higher than 3.80V per cell, the charger will discharge the battery; on the opposite, when the
battery voltage lower than 3.80V per cell, the charger will charge the battery.

Widely apply to various field
Agriculture drone, Industrial drone, other UAV Drones,
like 6S 16000mAh,22000mAh LiPo/LiHV battery,
2pcs 6S LiPo/LiHV batteries charged/discharged at the same time, good helper for big capacity battery.

Independent charging port for 2/3S Radio battery
1pc 2S or 3S Radio battery can be charged, one battery one time


Specification
Input voltage: AC 110V or 220V
Charge power: 1200W (2x600W)
Charge current range: 5A/10A/15A/20A/25A
Battery type: LiPo/LiHV
Battery cell count: 2-6S( also can charge 2S/3S radio battery)
Working mode: Storage mode/Charge mode
Balance current: 1.5A/cell
Net Weight: 3.1KG
Dimensions:268x140x127 mm